- SUPPORT DJI PROFESSIONAL AUTOPILOT SYSTEM
The DJI iOSD MARK II should be used in conjunction with the DJI autopilot system, such as A2,WooKong-M, Naza-M or Naza-M V2. This will undoubtedly give you a fantastic flight performance. Depending upon DJI’s accumulation of historic and reliable information integration technology, the iOSD MARK II can grab the most accurate first-hand flight data information in the shortest possible time.
- REAL-TIME ACCURATE FLIGHT DATA & VIDEO SIGNAL SUPERPOSITION
The DJI iOSD MARK II can collect real-time video and flight data, which will help you to obtain the aircraft status information during flight. It can display power voltage, flight velocity, height, distance from the home point, horizontal attitude and GPS satellite number, etc.
- SUPPORT DOUBLE VIDEO SOURCE INPUT, SWITCHABLE DURING FLIGHT
The DJI iOSD MARK II supports two video input sources: PAL or NTSC mode, which can be selected remotely by an R/C transmitter switch. By doing this the pilot can achieve double video alternation during flight and can also set one source for the aerial camera and the other one for FPV. This will ensure the nose direction of the aircraft is under control and a safety return during filming.
- REMOTE VIDEO LINK CHANNELS IN REAL-TIME SWITCH
The R/C TX switch can also change the wireless video transmitter channel remotely when user uses the wireless video transmitter designated by DJI. This design has brilliantly avoided the inconvenience of manual switch on the ground. Should there be any video signal interference during flight the pilot can switch channels immediately to finish the flight mission.
- FLIGHT LOG FUNCTION
The DJI iOSD MARK II can record the flight log, which will help you to record the input and output information of every channel, GPS signal, power voltage, home distance and height, etc. (The current iOSD on the market will have flight log function after firmware upgrade.)
- Video Input Model: PAL/NTSC
- Video Output Model: PAL/NTSC
- Temperature: -20℃~60℃
- Size: 52mm X 41mm X 11mm
- Weight: 56g
- Hardware Supported
- Voltage: 3S~6S
- Current(Typical Value): 60mA@25.2V; 103mA@12.6V
Rated Power: 1.25W
- Naza-M V2
1.iOSD Information Transmission
2.Video Transmission, Two Video Signal Channels Input & Switch
3.Channel Switch Supported for the Wireless Video Transmitter Module specified by DJI
4.DJI Z15 Supported