MicaSense RedEdge-P

$7,995.00

MicaSense RedEdge-P

Image

RedEdge-P

THE NEW STANDARD FOR DATA QUALITY AND REPEATABILITY

RedEdge-P uses purpose-built optics and industrial image sensors coupled with narrowband, scientific-grade filters. In addition, it undergoes a rigorous factory calibration process, creating a high-quality, calibrated, rugged tool for high-quality outputs.
RedEdge-MXDLS2
PanchroRGB

KEY FEATURES

INCREASED STORAGE
New professional removable storage standard in CFexpress, enabling over two captures per second and the immediate turnaround time between flights by simply swapping cards.

SYNCHRONIZED CAPTURE OF HIGH-RES RGB AND MULTISPECTRAL
Simultaneous capture of up to six bands, enabling multiple high-resolution outputs such as RGB, crop vigor indices (NDVI, NDRE, etc), and high resolution panchromatic.

TWICE THE SPATIAL RESOLUTION OF THE PREVIOUS REDEDGE
With a high-resolution panchromatic imager, RedEdge-P enables higher-resolution RGB and multispectral outputs – 2cm resolution when flying at 60m. Spot smaller problems or features sooner and make more reliable management decisions across a variety of use cases.

WORKS WITH WHAT YOU HAVE (DRONES, PROCESSING, FLIGHT PLANNING)
This solution is compatible with a wide range of aircraft, from large fixed wings to small multirotors. Flight planning and data processing can be done with industry-standard tools.

RUGGED DESIGN
IP4X rated for dust and splash protection

 

CALIBRATED MULTISPECTRAL IMAGERY

CRP 2  A new compact version of our Calibrated Reflectance Panel. Same functionality, now in a smaller size and easier to carry!

**Note: Each camera kit comes with the radiometric calibration tools you need to enable comparison over time.

DLS 2  Our next-generation light sensor, with cutting-edge technology for irradiance and sun angle measurements. It provides more accurate, reliable data, greatly reduces the need for post-processing, and substantially improves radiometric accuracy. With the integrated GPS, setup with any aircraft is simple.

RedEdge-MX (4cm at 60m)

RedEdge-MX (4cm at 60m)
RedEdge-MX (4cm at 60m)
RedEdge-P (2cm at 60m)
RedEdge-P (2cm at 60m)

THE SAME NARROW BANDS, AT TWICE THE RESOLUTION

This solution offers a seamless way to capture not just standard spectral bands but at a spatial resolution that takes it a step further. With a high-resolution panchromatic imager, RedEdge-P enables higher-resolution RGB and multispectral outputs – 2cm resolution when flying at 60m.

Image

RedEdge-P Sensor Specifications
Weight 350 g (12.3 oz.)
(RedEdge-P + DLS 2)
Dimensions 8.9 x 7.0 x 6.7 cm
(3.5in x 2.8in x 2.6in)
External Power 7.0 V – 25.2 V
Power Input 5.5/7.0/10W (standby, average, peak)
Sensor Resolution 1456 x 1088 (1.6MP per MS band)
2464 x 2056 (5.1MP panchromatic band)
Spectral Bands Blue, green, red, red edge, near-IR
(global shutter, narrowband)
Wavelength (nm) Blue (475 nm center, 32 nm bandwidth),
green (560 nm center, 27 nm bandwidth),
red (668 nm center, 14 nm bandwidth),
red edge (717 nm center, 12 nm bandwidth),
near-IR (842 nm center, 57 nm bandwidth)
RGB Color Output 5.1 MP (global shutter, aligned with all bands)
*with appropriate post-processing
Ground Sample Distance (GSD) 7.7 cm per pixel (per MS band) at 120m (~400 ft) AGL
3.98 cm per pixel (panchromatic band) at 120m (~400 ft) AGL
Capture Rate Up to 3 captures per second raw DNG
Interfaces 3 configurable GPIO: select from trigger input, PPS input, PPS output, and top of frame signals. Host virtual button. USB 2.0 port for WiFi. Serial. 10/100/1000 Ethernet. CF Express for storage
Field of View 50° HFOV x 38° VFOV (MS)
44° HFOV x 38° VFOV (PAN)
Storage CFexpress Card

NOTE: Specifications may change without notice.

Pin It on Pinterest

Share This